Sep 24, 2018 –
The purpose of this document is to provide guidance to quarry operators regarding the appropriate assessment and control of respirable crystalline silica (RCS) in Australian quarries.
|
Mar 28, 2018 –
This document is intended primarily to provide a standardised approach for the pneumatic transfer of bulk cementitious
powders into silos used by the premixed concrete industry.
|
Mar 1, 2018 –
This document has been developed to assist the proponents in preparing, and assist the assessing officers in reviewing, BRM proposals.
|
May 4, 2015 –
This document provides guidance to the operators of QLD quarries regarding the appropriate procedures to adopt to control environmental noise. It has been endorsed by EHP.
|
Apr 1, 2015 –
A hazard has been identified with trucks
manufactured to comply with Euro V Emission
Standards. The exhaust can be vented at ground level rather than above the cabin height.
|
Dec 16, 2014 –
To reduce the unacceptable safety risks that may be involved in delivery of concrete to on-site pumps, CCAA has developed a new industry guidelines document and checklist.
|
Jun 27, 2014 –
NSW legislation and regulations require that all operators must minimise the amount of new resources used in the production process, ensure that as much material as possible is re-used or recycled and that any waste that cannot be re-used is disposed
|
Oct 1, 2013 –
Covers motivation, project, content, interim data and future work.
|
Aug 30, 2013 –
A First Flush system is an integral component of a concrete batch plant’s water management system and it needs to be designed so that in a rainfall event contaminated water is flushed into a holding pit.
|
Jul 5, 2013 –
If you’re designing and building your dream home, concrete can help you create something that is not only stunningly beautiful but absolutely unique.
|
Aug 31, 2012 –
Opportunities for drivers to take rest breaks vary greatly from day to day.
|
Aug 30, 2012 –
The development of model codes
and guidelines for the assessment of extractive industrythroughout Queensland would provide significant benefits including greater transparency, certainty and consistency
and ensure that the State Planning Policy 2/07
|
Jul 1, 2012 –
Sustainable development can be
conceptually broken into three constituent
parts - social, environmental and economic.Sustainability is achieved where all three of these parts overlap.
|
Jun 30, 2012 –
This document provides the industry with best practice management guidelines for concrete by-product re-use management that meets legislative requirements.
|
Jul 21, 2009 –
Manager's guide to low voltage switch board safety has been developed to provide managers and supervisors with a basic understanding of the requirements for successfully managing the risks associated with working on electrical switchboards.
|
Oct 31, 2008 –
A default slump of 100-mm for residential
slabs and footings (domestic houses and townhouses only) has recently been
introduced.
|
Aug 29, 2008 –
A default slump of 100-mm for residential
slabs and footings (domestic houses and
townhouses only) has recently been introduced.
|
Jul 28, 2006 –
Bulk tankers are typically loaded with cement from gravity fed silos through a loading spout or sock positioned above the vehicle.
|