Skip to search results
Data pager
Data pager
123
Page size:
PageSizeComboBox
select
 53 items in 3 pages
Show all 53
 
Data pager
Data pager
123
Page size:
PageSizeComboBox
select
 53 items in 3 pages
Show all 53
Content Icon
Feb 1, 2018 – This data sheet highlights the potential causes of surface delamination of concrete industrial floors and pavements and makes recommendations to reduce the risk of occurrence.
Content Icon
Dec 1, 2017 – This Data Sheet provides guidance on the planning, design, construction, maintenance and specification aspects that need to be considered to ensure a successful concrete paving project.
Content Icon
Oct 1, 2017 – Most of the problems associated with placing concrete in hot weather conditions relate to the increased rate of cement hydration at higher temperatures and the increased rate of evaporation of moisture from the fresh concrete.
Content Icon
Sep 1, 2017 – With the many different designers’ specifications and suppliers’ proprietary products, it is important that customers are very specific as to their requirements when ordering concrete.
Content Icon
Sep 1, 2017 – This datasheet provides guidance on the preparation of specifications for the supply of premixed concrete.
Content Icon
Apr 1, 2015 – Roadbases are quarry materials which are used in the construction of road pavements. They are made up of a combination of coarse and fine crushed materials which, when placed and compacted at the correct moisture, form a rigid layer.
Content Icon
Apr 1, 2015 – This datasheet sets out procedures for removing mortar smears, splatters or stains from surfaces such as clay masonry, concrete masonry, concrete, timber, plasterboard, aluminium and powdercoated finishes.
Content Icon
Apr 1, 2015 – This datasheet sets out items in the plans and specification that the builder should review prior to ordering materials and commencing construction of any masonry.
Content Icon
Apr 1, 2015 – Plastic settlement cracks are so-called because they form while the concrete is still plastic, ie has not set.
Content Icon
Apr 1, 2015 – This data sheet provides guidance on rendering for small projects
Content Icon
Nov 21, 2014 – Tolerances can be defined as the allowable variations from the specified values or performance levels.
Content Icon
Nov 20, 2014 – Concrete is one of the most widely used construction materials. Anyone who uses concrete or is responsible for managing or supervising its use should be aware that it may be a hazard.
Content Icon
Jan 1, 2014 – No-fines concrete is a concrete containing little or no fine aggregate. The coarse aggregate should preferably be a single-size material (nominal maximum sizes 10mm and 20mm being the most common).
Content Icon
Nov 1, 2012 – Thermal mass is why buildings having solid construction typically feel cooler during the summer and warmer during the winter.
Content Icon
Oct 1, 2012 – This datasheet sets out how to choose the appropriate 'salt-attack resistance' grade of masonry unit and mortar type for a project.
Content Icon
Jan 1, 2012 – This data sheet provides advice on mixing mortar for masonry projects. For guidance on choosing the appropriate 'salt-attack resistance' grade of masonry unit and mortar type for a project see Concrete Data 'Mortar Mixes for Masonry'.
Content Icon
Jan 1, 2012 – The surface area of cement is a measure of cement fineness. In Australia, the surface area of cement is determined in accordance with AS 2350.8 Fineness Index by Air Permeability Method, known as Blaine test.
Content Icon
Jan 1, 2012 – This data sheet sets out information on the selection of render types, construction procedures and surface finishes using renders.
Content Icon
Jan 1, 2012 – Honeycombing refers to voids in concrete caused by the mortar not filling the spaces between the coarse aggregate particles.
Content Icon
Jan 1, 2012 – Drying shrinkage has been ineffectively used by some design engineers as a means of controlling cracking in slab construction.
Content Icon
Jun 1, 2011 – Since the early 1980s there has been steady progress towards increasing the energy efficiency of building envelopes, with a view to reducing the consumption of operational heating and cooling energy, and reducing greenhouse gas emissions.
Content Icon
Aug 1, 2010 – This data sheet provides a description of the process and suggested specification clauses for burnished concrete surfaces, primarily for flatwork applications.
Content Icon
Aug 1, 2010 – This datasheet provides suggested clauses for inclusion in specifications for honed concrete surfaces. They are written with flatwork in mind, although other concrete surfaces can be honed.
Content Icon
Apr 1, 2010 – The main function of a sealer is to prevent staining of the surface and to facilitate its cleaning.
Content Icon
Oct 1, 2008 – This data sheet sets out procedures for removing common stains from concrete surfaces.